More Offers ⨯
Presenting Bose L1 Pro 8 with an easier load in and faster setup.Offers a generous coverage with a C-shaped line array featuring 8 articulated 2” neodymium drivers. This Bose Portable Line Array Speaker System delivers a 180-degree horizontal coverage with wide vertical dispersion, allowing your audience to hear clearly wherever they are seated or standing, even off to the extreme sides in small to medium venues.The L1 Pro 8 gives singer,songwriters and DJs both setup simplicity and supreme clarity the power to sound your best and simply perform.
With Bose L1 Pro 8 just Load in, set up, and play whenever you are ready as this ultra portable system is always ready to fill small venues like coffee shops and cafes with crystal clear sound and smooth tonal balance.
The L1 Pro 8 is easy to carry and easy to set up (and even easier to listen to). It weighs just 16 kilograms (35 pounds) and disassembles into three lightweight pieces.
Bose L1 Pro 8 features an incredibly powerful design that fills out your sound and has integrated subwoofer in L1 Pro 8 featuring a 7" × 13" RaceTrack driver, giving you performance that rivals a conventional 12" woofer without the cumbersome size.
L1 Pro system features a built-in mixer, so you can connect various instruments, microphones, and other sources easily. You get two combo XLR-1/4” phantom-powered inputs, 1/4" and 1/8" (3.5 mm) aux inputs, plus Bluetooth streaming capability.
With the L1 Mix app, you can adjust mixer settings instantly from your phone or even walk the room, hear how the mix sounds, and fine-tune as you go. Change volume and tone settings in the app and watch the LED encoder on your L1 Pro move to match.
|IN THE BOX|
|Sales Package||L1 Pro8 System and User Documentation|
Self-powered line array with integrated bass module and onboard three-channel
|Frequency Response (–3 dB)||45 Hz to 16 kHz|
|Frequency Range (–10 dB)||33 Hz to 18 kHz|
Nominal Vertical Coverage Pattern
Vertical Beam Type
Nominal Horizontal Coverage Pattern
Calculated Maximum SPL @ 1 m,
|Calculated Maximum SPL @ 1 m, peak||118 dB|
Type Two-channel, Class D
Low Frequency Amp Channel 240 W
High / Mid Frequency Amp Channel 60 W
Cooling Convection cooling
AC Power Input 100–240 VAC (±15%, 50/60 Hz)
Input: Electrical Type IEC
Initial turn on inrush current 15.8 A at 120 V; 30.1 A at 230 V
Inrush current after AC mains
interruption of 5 s 1.2 A at 120 V; 19.4 A at 230 V
Standby, Channel Parameters, Signal/Clip, Mute, Phantom Power, ToneMatch,
Bluetooth LED, System EQ
|Bluetooth Types||AAC or SBC for audio streaming, LE for system control|
No of Channels
|Speaker Drivers||7 x 13″ (sub), 8 x 2″ (array)|
|2 x XLR-1/4″ combo, 1 x 1/8″ (aux), 1 x 1/4″ (aux)|
|Outputs||1 x XLR (DI)|
Audio Type RJ-45 connector for ToneMatch cable connection, providing digital audio and
power connection for the optional T4S/T8S ToneMatch Mixer
|Dimension||2000 × 317 × 456 mm|
|Warranty Period||2 Years|